Clairvyn
Sign inStart building

Exports that open where your team works: DWG and DXF for AutoCAD, IFC4 for Revit and ArchiCAD

Ronak Marlecha

5 minutes to read

All posts

A plan only becomes part of a project once the rest of the team can open it. Every Clairvyn plan leaves as layered CAD, a BIM model, 3D files and schedules, in the formats the office, the consultants and the client already use.

Exports that open where your team works: DWG and DXF for AutoCAD, IFC4 for Revit and ArchiCAD

The short version

  • Plans export as DXF in any unit and as DWG, both of which open in AutoCAD.
  • Architecture, structure, plumbing, electrical, mechanical and detail each sit on their own layers, so every consultant sees their own discipline.
  • The 3D and BIM studio exports IFC4 that validates clean and opens in Revit and ArchiCAD.
  • GLB, OBJ and STL go to SketchUp, Rhino, Blender and 3D printers, with elevations and sections as SVG and PDF.
  • Schedules leave as XLSX and CSV, and the bill of quantities is priced in INR or USD.

When we started Clairvyn, the first thing architects asked us after seeing a generated plan was not whether it looked good but whether they could open it in their own software. That question is the right one, because a floor plan that lives only inside one tool is a picture, while a plan the structural engineer can open in AutoCAD and the services consultant can load into Revit becomes part of the project. So we have treated exports as part of the drawing itself from the beginning, and this post walks through every format a Clairvyn plan can leave in and who each one is for.

Why the handover matters

On almost every project I have seen, the architect is one office among several. The structural consultant works in AutoCAD, the services consultant often in Revit, the interior designer in SketchUp, and the client wants a set of drawings and a few good images they can show the family. Each of those people needs the same building in a different shape, and the hours spent converting, re-layering and redrawing between them add nothing to the design.

Clairvyn holds one plan, with its walls, rooms, doors, windows, furniture, structure and services, and writes each export from that single source. A door that opens left on the floor plan opens left in the DWG, in the IFC model and in the 3D render, which means the consultants are all working from the same building.

DWG and DXF for AutoCAD

Every plan exports as DWG and as DXF, and both open in AutoCAD and in the other tools that read those formats. DXF exports in whichever unit you choose, so an office that draws in millimetres gets millimetres and an office that works in feet and inches gets feet and inches, without anyone rescaling the drawing after it arrives.

The sheets carry what an architect expects to find on a working drawing: room sizes in feet and inches and in metres, so a bedroom reads as 12'0" x 15'0" (3.66 x 4.57 m), areas in square feet and square metres, door and window schedules with their fire ratings, an area statement with carpet, built-up, FAR and RERA carpet areas, the grid, the north arrow, the road and neighbours, the setbacks, the plinth, and the steps and ramp at the entrance. A single click switches between the Technical look, which is the drafting sheet, and the Presentation look, which is the sheet you hand to a client. PNG at 300 dpi, SVG and a ZIP of the whole set are there as well, for the times when a file needs to go into a report or an email rather than a CAD package.

Layers for every consultant

A drawing that puts everything on one layer is hard to work with, so a Clairvyn plan keeps its disciplines apart. Architecture, structure, plumbing, electrical, mechanical and detail each sit on their own layers, both in the app, where you can switch them on and off, and in the DXF and DWG files you download.

In practice this means you can send the plumbing engineer a file in which the stacks and pipe runs are visible without furniture or ceiling information in the way, give the structural engineer a clean view of the grid, columns and beams, and keep the furniture layer for the client sheet. Each consultant opens the file and sees their own discipline first, which is how they would have set it up themselves.

IFC4 for Revit and ArchiCAD

For teams that work in BIM, the 3D and BIM studio exports IFC4, which validates clean and opens in Revit and ArchiCAD. The model arrives as typed elements rather than loose geometry: walls, doors, windows, slabs, columns and beams each come in as what they are, with their properties attached, so the receiving team can schedule, tag and coordinate them in their own tool straight away.

The structural model exports to IFC4 as well, and the BIM studio adds the exchanges that larger teams rely on, including BCF for issues, COBie for handover data and IDS checks against a project's information requirements. An architect who works in Revit can therefore start a scheme in Clairvyn and carry it into the office's usual BIM workflow without rebuilding the model.

3D models, renders and drawings

The 3D studio exports the whole building as GLB, OBJ and STL, and the GLB file carries its furniture and materials with it. GLB and OBJ open in SketchUp, Rhino and Blender for anyone who wants to take the model further, and STL is ready for a 3D printer when a physical model helps a client meeting.

From the same studio you can render images in HD, in 4K and at print size, cut elevations and sections and export them as SVG and PDF, and download the full drawing set as a PDF. Because every one of these comes from the same plan as the DWG, the elevation in the presentation and the elevation the contractor prices from show the same building.

Schedules and quantities

Some of the most useful exports are not drawings at all. Door and window schedules, the structural schedules with the bar bending schedule, and the services schedules all export as XLSX and CSV, so they open in Excel or in whatever estimating tool the quantity surveyor uses.

The BIM studio also prepares a bill of quantities with prices on it, in INR for projects in India and in USD elsewhere, together with the embodied carbon of the building. That gives the client a sense of cost while the design is still easy to change, and it gives the surveyor a structured starting point that matches the drawings line for line.

A typical handover

Here is how a project often runs for us. You describe the building to Kozo, adjust the plan in the editor until it is right, and then open the 3D and BIM studio to finish it. The structural engineer receives the DWG with the structural layers and the schedules in XLSX, the services consultant receives the IFC4 model or the DWG with the plumbing, electrical and mechanical layers, the interior designer takes the OBJ into SketchUp, and the client receives the Presentation sheets as PDF with a few 4K renders.

Everyone opens their file in the software they already use, and everyone is looking at the same building, which is the whole point of exporting properly. When something changes, you make the change once in Clairvyn and send the updated files, rather than asking each consultant to redraw their part.

Questions people ask us

Can I open a Clairvyn floor plan in AutoCAD?

Yes, every plan exports as DWG and as DXF in any unit, and both open in AutoCAD with the architecture, structure and services on their own layers.

Can I open a Clairvyn model in Revit or ArchiCAD?

Yes, the 3D and BIM studio exports IFC4 that validates clean and opens in Revit and ArchiCAD, with walls, doors, windows, slabs and the structure as typed elements carrying their properties.

Are plumbing, electrical and structure on separate layers?

Yes, architectural, structural, plumbing, electrical, mechanical and detail layers are kept apart, so you can send each consultant only what they need.

Can I export in feet or in metres?

Yes, DXF exports in the unit you choose, and the sheets give room sizes in feet and inches and in metres, with areas in square feet and square metres.

Can I take the model into SketchUp, Rhino or Blender?

Yes, export GLB, OBJ or STL from the 3D studio. They open in SketchUp, Rhino and Blender, and STL is also ready for 3D printing.

Which schedules can I export?

Door and window schedules, structural schedules with the bar bending schedule, and the bill of quantities, as XLSX and CSV. The bill of quantities is priced in INR for projects in India or in USD elsewhere.

Read enough? Draw your own.