From an old drawing to an editable plan: importing DWG, PDF, scans and photos into Clairvyn
Most practices keep years of drawings that nobody can edit any more. Clairvyn reads them as they are, from an AutoCAD file to a phone photo of a printed sheet, and turns each one into a plan you can change, engineer and export.
From an old drawing to an editable plan: importing DWG, PDF, scans and photos into Clairvyn
The short version
- Clairvyn imports AutoCAD DWG and DXF, PDF and scanned PDF, SVG, IFC, GLB and glTF, and any image of a floor plan, including phone photos and scans.
- A scan takes its scale from the room sizes written on it, and you confirm that scale with one click.
- Walls, doors, windows, rooms and furniture are read from the drawing, and an unnamed room is named from the furniture inside it.
- An imported plan works like any plan Kozo draws: you can edit it, change it in a sentence, add structure and services, and open it in 3D and BIM.
- Structure and services are drawn on your plan as it is, so your walls, doors and windows stay where you drew them.
Every practice I have spoken to keeps a cupboard, a shared drive, or more often both, full of drawings from projects that finished years ago. Some of them are clean AutoCAD files, some are PDFs sent over by a consultant who has since moved on, and a surprising number are paper sheets that were scanned once for safekeeping and never opened again. When a client comes back for an extension, an extra floor or a change of use, those drawings become the most useful thing the office owns, because they record what was actually built on that plot.
We built the import in Clairvyn so that an old drawing can be the starting point of the new job rather than something to trace over. You bring whatever file you have, Clairvyn reads the walls, doors, windows, rooms and furniture from it, works out its scale, and gives you back a plan that behaves in every way like one Kozo drew from a written brief.
Why old drawings matter
A refurbishment, an extension or a second storey always begins with the building that is already there, and the existing drawings are the quickest honest account of it. The difficulty has been that a scanned sheet is a picture of a plan rather than a plan: its walls are not walls you can move, its dimensions are not tied to anything, and its rooms have no areas you can schedule. Redrawing it by hand used to take the first week of a project, and that week was spent on work the client never sees.
With the import, the old sheet turns into geometry you can work with in the time it takes to read it, which lets the first conversation with the client be about the new design. It also means the knowledge stored in a practice's past projects is there for the next team to use, in the same tools they use for everything else.
The files it reads
We wanted the import to accept whatever an architect is actually holding when a project starts, so it reads the formats that come out of drawing offices, consultants and phones alike:
- CAD drawings: AutoCAD DXF and DWG, with every storey of a multi-floor set.
- Documents: PDF, scanned PDF and SVG, the way consultants and authorities usually share plans.
- Models: IFC from Revit and ArchiCAD, and GLB and glTF from other modelling tools.
- Pictures: PNG, JPEG, WebP and HEIC, which covers phone photos of a printed sheet, scans, and hand sketches with their sizes written on.
When a CAD or IFC file already carries pipes, ducts, sprinklers, columns or beams, those come through with the walls, so a consultant's earlier services or structure drawing is ready to build on instead of being drawn again.
How a scan finds its scale
A sheet that has been printed, photocopied and scanned has usually lost its printed scale along the way, so Clairvyn takes the scale from the drawing itself. It reads the room sizes written on the plan, for example a bedroom marked 11'1" x 13'10" (3.38 x 4.22 m), sets the scale of the whole sheet from them, and shows you the result so that you can confirm it with one click.
A scanned PDF opens directly at its floor plan, so a cover sheet or a title page in front of it does not get in the way. For a drawing without written sizes, you calibrate the scale against one dimension you know, such as a wall you have measured on site, and the rest of the sheet follows from it.
Reading a drawing as an architect does
Recognising lines is only part of reading a plan, because an architect also understands what those lines mean, and we have tried to teach the import the same habits. A run of floor to ceiling glazing is read as windows, and the rooms behind it are closed properly. A wide hall or a shopfront with a long row of windows closes as one room with every window in place. A room that was never labelled takes its name from the furniture drawn inside it, so a space holding a bed and a wardrobe becomes a bedroom and a space with a basin and a WC becomes a toilet.
Furniture is recognised and placed where the drawing shows it, and when a piece is not yet in the Clairvyn library it is traced, named and kept, so the next drawing from the same office reads it straight away. Before you move on, the plan groups what it has read by kind and by room, which means a whole group can be confirmed with one click and the drawing stays in your hands from the start.
A small example
Take a two bedroom flat whose only record is a hand drawn sheet from the nineties, scanned at some point and saved as a PDF. Imported into Clairvyn, it comes back as a plan with its rooms named and sized in both units: the living and dining room at 22'8" x 13'10" (6.91 x 4.22 m), the master bedroom at 16'9" x 15'9" (5.11 x 4.80 m), the second bedroom at 10'10" x 15'9" (3.30 x 4.80 m) and the kitchen at 10'10" x 13'10" (3.30 x 4.22 m), with the passage, both toilets and the balcony around them.
From there the work is the work you would normally do. You might move the kitchen wall to open it to the dining area, ask for structure so that the engineer has a framing plan to review, and add services so the plumbing sheet shows where the new sink drains. All of that happens on the plan you imported, and the walls you did not touch stay exactly where the old drawing put them.
What you can do with it afterwards
Once a drawing is in, it is a Clairvyn plan like any other, and everything else in the product works on it:
- The editor: rooms, walls (including free and curved walls with their wall types), doors, windows, furniture, services points, notes and dimensions.
- Changes in a sentence: type "add a sliding door to the balcony" or "split the master bedroom" and Kozo makes the change on the drawing.
- Structure: framing plans, footings and schedules drawn on your plan, with columns standing inside your walls and never in a door or a window.
- Services: plumbing, electrical and mechanical sheets for every floor.
- 3D and BIM: the plan opens in 3D in the browser, and the BIM studio gives you schedules and IFC4 for Revit and ArchiCAD.
When the design is ready to go back to the rest of the team, the plan exports as DXF and DWG that open in AutoCAD, with each discipline on its own layer, so the drawing that arrived as a scan leaves as clean, layered CAD.
Starting from photos of the rooms
Some projects have no drawing at all, which is common with older homes and small commercial spaces. For those, Clairvyn Interiors starts from photos of each room, ordinary or 360, and draws the measured plan from them: the size and ceiling height of every room, what each room is used for, the furniture where it actually stands, and a door into every room. You can open that plan in the editor, walk through it in 3D in the room's own wall colours and floors, and restyle a room in its own photo by tapping the walls, the floor or a single sofa to try a new colour or finish.
Between drawings, scans and photos, the existing building is usually only a few minutes away from being a plan you can design on, which is what we wanted for every architect who has ever opened an old file and sighed at the thought of redrawing it.
Questions people ask us
What file types can Clairvyn import?
AutoCAD DXF and DWG, PDF, scanned PDF and SVG, IFC, GLB and glTF, and any image of a floor plan: PNG, JPEG, WebP, HEIC, phone photos, scans and hand sketches with their sizes written on.
How does Clairvyn know the scale of a scanned drawing?
It reads the room sizes written on the scan, sets the scale of the whole sheet from them and asks you to confirm it with one click. A file without written sizes is calibrated against one dimension you know.
Will my walls move when Clairvyn adds structure or services?
No, structure and services are drawn on your plan as it is. Your walls, doors and windows stay exactly where you drew them, and columns stand inside your walls rather than in a door or a window.
Can I edit an imported plan?
Yes, an imported plan opens in the Clairvyn editor like any plan Kozo draws, with its rooms, walls, doors, windows, furniture, services points, notes and dimensions, and you can also change it by typing a sentence.
Can I start from photos of a room instead of a drawing?
Yes, in Clairvyn Interiors, photos of each room, ordinary or 360, become a measured plan with each room's size, ceiling height, use and furniture, which you can then edit, walk through in 3D and restyle.
Can I send the imported plan back to AutoCAD?
Yes, every imported plan exports as DXF and DWG that open in AutoCAD, with each discipline on its own layer, and as IFC4 for Revit and ArchiCAD from the 3D and BIM studio.